ВУЗ: Не указан
Категория: Не указан
Дисциплина: Не указана
Добавлен: 28.09.2024
Просмотров: 676
Скачиваний: 0
1 - The Basics
Loading a Sequence from a Different Bank
3.Press the Auto… function key (F3). The pop-up dialog box shown above appears.
4.Select the bank to be automatically loaded on power up. Banks can be selected using the numeric keypad, Data Entry Control, INC/DEC buttons and cursor buttons.
5.Press Save to confirm your choice or Cancel to cancel the operation.
Loading a Sequence from a Different Bank
An individual sequence can be loaded from another bank using the sequence browser. Simply load in the desired sequences, then save the bank to disk. Sequences can be either Emulator sequences or Standard MIDI Files.
v To Load a Sequence from Another Bank:
1.Select the Drive and Bank containing the sequence you wish to load using the cursor buttons, INC/DEC buttons or the Data Entry Control from the Disk Browser.
2.Select the Sequence you wish to load from the Sequence Browser.
3.Press the Load function key (F4). A pop-up window prompts you to select the destination sequence.
4.Choose a location for the sequence using the Data Entry Control, the INC/DEC buttons or the numeric keypad. You may overwrite an existing sequence or choose an empty sequence as the destination. There are 50 possible sequence locations (and 50 Flash locations).
5.Press OK to load the selected sequence or Cancel to cancel the operation.
•If you are loading an imported sequence from the bank browser, press Merge to combine it with the bank of presets in memory.
EOS 4.0 Software Manual 43
1 - The Basics
Loading Standard MIDI Files
Important Information for Loading Standard MIDI Files
*Use PC DOS formatted, highdensity diskettes to load from floppy. Disks can be formatted on either the Mac or PC.
*To be readable by EOS, the file MUST have 0-8 characters, then a period, then “MID”.
Loading Standard MIDI Files
The Emulator can load and play Standard MIDI File sequences (type 0 or 1). Sequence files should conform to PC DOS format using a DOS formatted disk and using the following format for the file name: 12345678.MID (up to eight characters followed by “.MID”). It is important to note that Standard MIDI Files appear as Banks, NOT as sequences in the sequence browser.
v To Load a Standard MIDI File from Floppy Disk:
1.Insert a DOS formatted floppy disk containing the Standard MIDI Files.
2.From the Disk Browser, select the floppy drive.
3.Press Browse.
4.Select Banks. The MIDI sequences appears as banks.
5.Press the Load function key (F4). A pop up dialog box appears warning you that loading will destroy the resident bank.
6.Press the Merge button (F4). The selected sequence will be merged into the current bank, and will be placed in the first empty sequence location.
7.Press OK to load the selected sequence or Cancel to cancel the operation.
Saving Banks
A bank can be saved to disk from the bank browser.
v To Save a Bank:
1.From the Browser, press the Save function key (F5). The following screen appears:
44 E-MU Systems
1 - The Basics
Finding Banks, Presets, Samples & Sequences
2.Choose a location for the bank using the Data Entry Control, the INC/ DEC buttons, cursor buttons or the numeric keypad.
3.Press OK to load the bank or Cancel to cancel the operation. If you pressed “OK” the bank will be saved and the main preset selection screen appears. If you are about to overwrite an existing bank, the display will warn you.
•If the bank contains SoundSprint presets (presets in locations 990-999), the display will ask you if you want to save the SoundSprint presets along with the bank.
Finding Banks, Presets, Samples & Sequences
This utility searches your disk library for a particular pattern of letters and numbers (a search string). If it finds the string anywhere in the name, the bank will be selected. Use the Find utility again to find additional matching items.
v To Find a Bank:
1.From the Bank Browser, press the Utilities function key (F1).
2.Press the Find function key (F6). A screen similar to the following appears.
3.Select the type of item (folder, bank, preset, sample or sequence) you want to search for. If you have an idea of where the item is located, you can narrow the search by inputting additional data about the drive, folder or bank. Selecting “All” tells EOS to search everything.
4.Press the String function key (F4), and enter the search string. Letters can be selected using the numeric pad, Data Entry Control, INC/DEC buttons and cursor buttons, or using an ASCII keyboard.
5.Press the Search function key (F6) to search for the item or the Cancel function key (F1) to cancel the operation.
EOS 4.0 Software Manual 45
1 - The Basics
Naming Banks
OThe Assignable Keys have secondary functions which are accessed by holding down the decimal point button and pressing the Assignable Key.
Naming Banks
Use this utility to rename a bank.
v To Name a Bank:
1.From the Bank Browser, select the bank you wish to rename using the cursor buttons, INC/DEC buttons or the Data Entry Control.
2.Press the Utilities function key (F1).
3.Press the Name function key (F4). A pop-up window appears prompting you to name the bank.
4.Change the name of the bank. Select letters using the numeric pad, Data Entry Control, INC/DEC buttons, cursor buttons, or using an ASCII keyboard.
5.Press the OK function key (F6) to confirm the new name or the Cancel function key (F1) to cancel the operation.
Erasing Banks
This utility allows you to erase an entire bank.
v To Erase a Bank:
1.From the Bank Browser, select the bank you wish to delete using the cursor buttons, INC/DEC buttons or the Data Entry Control.
2.Press the Utilities function key (F1).
3.Press the Delete function key (F3). A pop-up window appears asking you if you want to delete the bank.
4.Press the OK function key (F6) to delete the bank or the Cancel function key (F1) to cancel the operation.
Assignable Keys
You can program six assignable keys on the front panel to jump to almost any screen in EOS. This handy feature saves you from having to page through multiple menus to find the screen you want to edit. The assignable keys can be programmed from the assignable keys screen in the Master Utilities submodule or, directly from any screen in which you are working.
v To Program an Assignable Key from the Master Menu:
1.Press the Master button. The LED illuminates and the Memory Statistics screen appears.
2.Press the Utilities function key (F1). A second row of function keys appears.
3.Press the AsnKy function key (F1). The following screen appears.
46 E-MU Systems
1 - The Basics
Recording a Sequence
|
|
|
|
|
|
4. |
Select a screen. Use the Data Entry Control or the INC/DEC buttons to |
||
|
|
change the screen associated with each assignable key. |
||
|
5. |
Press Save to store the assignable keys settings and return to the |
||
|
|
Memory Statistics screen. Press Cancel to cancel the operation and |
||
|
|
return to the Memory Statistics screen. |
||
|
v To Program an Assignable Key from the Current Screen: |
|||
|
This method allows you to link an assignable key to the screen you are |
|||
Note: if a key is |
currently viewing. |
|||
• |
Press and hold one of the assignable keys from any screen. After two |
|||
assigned to RAM/ROM, it can’t |
|
seconds a pop up window appears, informing you that the assignable |
||
be programmed from the |
|
key has been programmed for the current screen. |
||
current screen |
|
|
|
|
|
Recording a Sequence |
|||
|
The easiest way to learn about sequencing is simply to record one. A multi- |
|||
|
timbral sequence contains more than one sound. In this guided tour of the |
|||
|
sequencer, you'll learn how to set up the metronome, the input quantize |
|||
|
function and lay down multitimbral tracks. These instructions apply to |
|||
|
both a rack and keyboard EOS synthesizers.If you’re using a Rack Emulator. |
|||
|
make sure your MIDI keyboard is connected. If you have two MIDI In ports, |
|||
|
use Port A. |
|||
|
v Load a Bank of Sounds |
|||
|
For your initial investigations, choose a bank which contains all types of |
|||
|
instruments, including drums. The Combos Bank might be a good choice. |
|||
|
1. |
From the main screen press the Load function key (F4). |
||
|
2. |
Select the desired Folder and Bank. |
||
|
3. |
Press the Load function key (F6). |
||
|
4. |
The display informs you that you are about to overwrite the current |
||
|
|
bank. Press OK (F6) to load the bank. |
||
v Select Multimode
5.From the main screen press the Mode function key (F6).
6.Select Multi (F6). The following screen should appear.
EOS 4.0 Software Manual 47
1 - The Basics
Recording a Sequence
•There are two different Multimode screen views. If you get the other screen, press the F6 function key, then press View (F3).
v Enter the Sequencer Submodule
7.Hold the Decimal Point button and press Assignable Key 1. The Sequence Manage screen appears.
8.Press the Edit function key (F5). The Edit screen appears.
v Set up the Metronome
The Metronome is important if you want to use the Quantize functions. If you don't want quantization and just want to enter a few tracks, skip to step 20.
9.Press the Setup button (F3). A second row of function keys appears.
10.Press the Metro button (F1). The following screen appears.
11.Set the Metronome parameters as shown.
12.The lower left field allows you to select a preset to be used for the Metronome. Select a preset containing a click or short percussion sound.
13.Move the cursor to the MIDI Note/Ch field.
14.Select the metronome sound using the Data Entry Control, INC/DEC buttons or the keyboard. The metronome sound is played as you scroll through the note numbers.
15.Press the Exit button to leave the Metronome screen.
48 E-MU Systems
1 - The Basics
Recording a Sequence
v Turn Quantization On
Input Quantization is really handy for laying down a drum track for your sequence.
16.Press the Setup function key (F3) again. A second row of function keys appears.
17.Press the Input function key (F3). The following screen appears.
18.Turn Quantize Input On (Select Yes). Set Swing to 50%. Set the Amount for quarter notes or eighth notes for starters.
19.Press the Exit button to lock in your selections and return to the Edit screen.
v Setup Track 1 for Recording
OK! You're almost ready to start recording.
20.Set the Track Mode to Record. Move the cursor to the Track Mode location as shown above. Set this field to R (Record) using the Increment button or Data Entry Control.
21.Move the cursor right to the Channel field. Set the channel to @1 using the Inc/Dec buttons or Data Entry Control. The @1 function records on MIDI channel 1 exclusively.
22.Select a preset. Move the cursor left to the Preset field. Play the keyboard and select the preset you want to play on your first track. Select a drum preset if you're laying down a drum track.
EOS 4.0 Software Manual 49