ВУЗ: Не указан

Категория: Не указан

Дисциплина: Не указана

Добавлен: 28.09.2024

Просмотров: 675

Скачиваний: 0

ВНИМАНИЕ! Если данный файл нарушает Ваши авторские права, то обязательно сообщите нам.

9 - Disk Menu

Load Bank

_ If the bank to be merged is not a native EOS bank, it's impossible for EOS to know the exact size in advance and the merge may not be completed.

_ A “Memory Full” error will occur if you try to merge two banks which together contain more than 50 sequences.

Load Bank

A bank can be loaded directly from the disk browser.

v To Load a Bank:

1.From the Disk Browser, press the Load function key (F4). The following screen appears:

2.Choose a bank to load using the Data Entry Control, INC/DEC keys or the numeric keypad. You may also change the current drive or folder by using the up/down cursor keys to select the drive or folder. Press OK to load the bank or Cancel to cancel the operation. If you pressed “OK” the bank will be loaded and the main preset selection screen appears.

3.If there is a bank already loaded, the following warning screen appears. press OK to overwrite the previously loaded bank or Cancel to cancel the operation.

4.Press Load again. The Merge button (shown above) allows you to combine the new bank with the bank that was previously loaded.

5.Press Merge to combine the two banks of presets or OK to continue. The display will warn you if there isn't enough memory to hold both banks.

Note:

EIII presets are translated into EOS presets as they are loaded. EOS voices are much bigger than EIII voices. By contrast, EOS sample zones within voices are tiny. At import/load time, EOS tries to collapse adjacent EIII voices into EOS voice+sample zones if it can (Envs, LFOs, etc. must be the same), otherwise, it creates voices. Therefore, EIII presets that use lots of differing voices really balloon in EIV. Simpler presets (Proteus-type presets which have the same settings for all samples) may collapse into a single voice.

366 E-MU Systems


9 - Disk Menu

Save Bank

Save Bank

A bank can be saved to disk from the disk browser.

v To Save a Bank:

1.From the Disk Browser, press the Save function key (F5). The following screen appears:

2.Choose a location for the bank using the Data Entry Control, the INC/DEC keys or the numeric keypad. You may change the current drive or folder by using the up/down cursor keys to select the drive or folder. Press OK to load the bank or Cancel to cancel the operation. If you pressed “OK” the bank will be saved and the main preset selection screen appears. If you are about to overwrite an existing bank, the display will warn you.

View…

The display can be changed to a list format instead of the normal iconbased format.

v To Change the Display View:

From the Disk Browser, press the View function key (F3). The screen with change to a list format. The List view is shown below. Pressing the View function key again toggles the view back to icon view.

EOS 4.0 Software Manual 367


9 - Disk Menu

Info, Lock Drive, & Sleep

The lock function actually locks the SCSI ID and not the drive. If you move a locked drive to another Emulator, it will be erasable.

_ Warning: When chaining multiple Emulators via SCSI, all must be running EOS 4.0 for Drive Sleep to work properly. If you use “Drive Sleep” under these conditions units may freeze, causing data loss.

Info, Lock Drive, & Sleep

This function displays information on the selected disk drive and also allows you to Lock the drive to prevent inadvertent erasure or tampering.

v To Get Disk Info:

From the Disk Browser, press the Info… function key (F6). A pop-up window appears with the vital statistics of the selected disk.

Lock

A disk drive can be locked and unlocked to protect it from inadvertent erasure or tampering.

v To Lock or Unlock a Drive:

1.To lock the selected disk, press the Lock function key (F4).

2.Press OK (F6). The drive will be write protected until you unlock it.

3.To unlock the disk, press the Unlock function key (F3), then press OK (F6).

Sleep

A disk drive can be put to “Sleep” in order to cut down on noise in the quiet studio environment.

v To Put a Drive to Sleep:

1.To put a drive to sleep, press the Sleep function key (F2).

2.The drive will be put to sleep.

3.To wake the Drive, select the Drive, then press Enter.

368 E-MU Systems

9 - Disk Menu

Folder Utilities

Folder

Folders help you organize your banks of sounds by providing another level between the bank and disk level. You may want to organize your banks by a particular project or by the type of sounds contained within, such as:

Sound Effects, Pianos, Strings, etc. If you do not wish to use folders, simply place everything on the disk into one folder. You can skip over the folder level in the browser and forget that folders even exist.

Folder Utilities

The Folder Utilities menu contains several additional functions. Pressing the Utils function key (F1) from the folder browser enables a second row of function keys.

New: Allows you to create a new folder.

Delete: Allows you to delete an unwanted folder

Rename: Allows you to rename the selected folder

Find: Allows you to search your disk(s) for a particular folder.

New

This utility allows you to create a new folder.

v To Create a New Folder:

1.From the Folder Browser, press the Utilities function key (F1).

2.Press the New function key (F2). A pop-up window appears prompting you to name your new folder.

3.Press OK after naming the new folder and it appears on the screen.

EOS 4.0 Software Manual 369


9 - Disk Menu

Delete

Delete

This utility lets you to delete a folder and all of its contents.

v To Delete a Folder:

1.From the Folder Browser, select the folder you wish to delete using the cursor keys, INC/DEC keys or the Data Entry Control.

2.Press the Utilities function key (F1).

3.Press the Delete function key (F3). A pop-up window appears asking you if you want to delete the folder.

4.Press OK(F6) to delete the folder and its contents or Cancel (F1) to cancel the operation.

Rename

Use this utility to rename a folder.

v To Rename a Folder:

1.From the Folder Browser, select the folder you wish to rename using the cursor keys, INC/DEC keys or the Data Entry Control.

The up/down cursor keys 2. Press the Utilities function key (F1).

add and delete spaces when

3.

Press the Rename function key (F4). A pop-up window appears

renaming. The tab key on an

 

prompting you to rename the folder.

ASCII keyboard clears the entire

 

4. Change the name of the folder. Select letters using the numeric pad,

name.

 

Data Entry Control, INC/DEC and cursor keys, or an ASCII keyboard.

 

 

 

5. Press OK (F6) to confirm the new name or Cancel (F1) to cancel the

 

 

operation.

Find…

This utility searches your hard disks for folders, banks, presets, samples or sequences using a search string (a pattern of letters and numbers). If it finds the selected string anywhere in the name, the item will be selected.

v To Find:

1.From the Folder Browser, press the Utils function key (F1).

2.Press the Find function key (F6). The screen shown below appears.

370 E-MU Systems