Файл: E-mu E 6400 EOS 4.0 manual.pdf

_ A “Memory Full” error will occur if you try to merge two banks which together contain more than 50 sequences.

O Hot Tip! To save all the samples in a bank in EIIIx, WAVE or AIFF format, press and hold the decimal point key while you press the Save function key. The display will offer you the option to save in these alternate formats. Press the function key under your choice of formats, then press OK.

Note that the preset information is NOT transferred, only the samples.

Load Bank

A bank can be loaded from the bank browser.

v To Load a Bank:

1.From the Bank Browser, select the bank you wish to load using the cursor keys, INC/DEC keys or the Data Entry Control.

2.Press the Load function key (F4). Loading a bank overwrites the bank currently in memory unless you choose to Merge the banks.

3.Press Yes to overwrite the current bank or Cancel to cancel the operation.

4.Press Merge to add the new bank to the current bank in memory.

5.A pop-up dialog box appears, prompting you to select the starting destination preset. Use the Data Entry Control, INC/DEC keys or the numeric pad to select the starting destination preset. As the new bank is merged, its presets will “fill in” any empty presets after this preset.

Save Bank

A bank can be saved to disk from the bank browser.

v To Save a Bank:

1.From the Bank Browser, press the Save function key (F5). The following screen appears:

2. Choose a location for the bank using the Data Entry Control, the INC/DEC keys or the numeric keypad. You may change the current drive or folder by using the up/down cursor keys to select the drive or folder. Press OK to load the bank or Cancel to cancel the operation. If you pressed “OK” the bank will be saved and the main preset selection screen appears. If you are about to overwrite an existing bank, the display will warn you.

•If the bank contains SoundSprinted presets (presets in locations 990999), the display will ask you if you want to save the SoundSprint presets along with the bank.

Links can be subsumed into the parent preset using the Subsume function (Preset Edit, Link, Utils).

Preset

A preset is one complete keyboard setup containing voices and samples arranged on the keyboard together with all programmable synthesizer parameters.

Preset Utilities

The Utilities menu contains two functions. Pressing the Utils function key (F1) from the Preset Browser enables a second row of function keys.

Sprint: Toggles SoundSprint™ mode on and off.

Find: Allows you to search the disk for a particular bank.

Soundsprint™

SoundSprint is a browser mode which automatically loads a preset as it is selected in the preset browser. The currently loaded preset remains active until the new preset is loaded.

Presets loaded via SoundSprint are placed at the top of the bank memory and are assigned preset numbers 990-999.

Up to ten Sprint presets can reside in RAM and can be instantly selected. Loaded presets remain in RAM until the memory capacity is exceeded, at which time the oldest sprint preset is erased. (Sprint will not erase the current preset.)

A “Memory Full” message will be displayed if the new preset cannot load without overwriting the current preset. This message may also appear if you have a conventional bank loaded.

Linked presets are NOT loaded using SoundSprint. Only the selected preset will be loaded.

O The Disk Key can be set to call up either SoundSprint mode or the Last screen you used in the Disk Browser. This preference is located under Master, Setup, SCSI.

OSoundSprint can be also be accessed by holding the Set/ Shift key (decimal point) and pressing Assignable Key 3.

OBrowse>Presets bypasses the SoundSprint function and allows you to assemble presets to save as a bank.

9 - Disk Menu

Soundsprint™

v To Turn SoundSprint Mode On:

•From the main preset screen, press the Sprint function key (F3).

The following screen appears and the selected preset will be automatically loaded. You can also press Sprint (F5) from the Preset Browser. The preset will be loaded from the last bank selected in the Disk Browser.

Other banks which are accessible by pressing the Bank function keys (F5 and F6).

v To Turn SoundSprint Mode Off:

1.From the SoundSprint Browser, press the Utilities function key (F1).

2.Press the SprntOff function key (F5). The Preset Browser screen appears and SoundSprint mode will be turned off.

v To Select Presets using SoundSprint:

1.From the SoundSprint Browser, select presets in the normal way using the left/right cursor keys, page keys or data entry control. The selected preset will automatically begin loading as soon as it is selected.

2.Press the Page key to selected another page of presets. An illuminated red arrow beside the page key indicates if there is another page of presets in that direction.

3.At the top of the SoundSprint menu there may be other banks listed as in the SoundSprint screen on the previous page. These banks may be selected using the <Bank and Bank> function keys (F5 and F6).