ВУЗ: Не указан
Категория: Не указан
Дисциплина: Не указана
Добавлен: 13.12.2020
Просмотров: 279
Скачиваний: 1
6.
Right-click
Local Area Connection
and click
Properties
from the shortcut
menu.
7.
In the
Local Area Connection Properties
dialog box, click
Internet
Protocol (TCP/IP)
and then click
Properties
.
8.
Click
Obtain an IP address automatically
.
9.
Click
Obtain DNS server address automatically
.
10.
Click
OK
in the
Internet Protocol (TCP/IP) Properties
dialog box and
then click
Close
in the
Local Area Connection Properties
dialog box.
11.
Click
Start
and then click
Run
. Type
cmd
in the
Open
text box and then
click
OK
.
12.
Type
ipconfig /release
and then press ENTER to release the IP
configuration.
13.
Type
ipconfig /renew
and then press ENTER to request an IP address from
the DHCP server.
14.
On DEN-DC1, in Network Monitor, click the
Capture
menu and then click
Stop and View
.
14.
On the
Display
menu, click
Filter
. This will bring up the
Display Filter
dialog box. Click
Protocol
and then click
Edit Expression
.
15.
In the
Expression
dialog box, click
Disable All
. In the disabled protocols
list, scroll down and click
DHCP
. Click
Enable
and then click
OK
twice.
Examine the DHCP packets that were sent between the server and the client
workstation.
16.
Close all open windows. Do not save the Microsoft Network Monitor
capture.
Practice:
Configuring DHCP Options
In this practice, you will:
!
Configure and test a DHCP reservation.
!
Configure DHCP server and scope options.
Ensure that the DEN-DC1 and the DEN-CL1 virtual machines are started.
!
Configure and test a DHCP reservation
1.
On DEN-CL1, open a command prompt. Type
ipconfig /all
.
2.
Write down the physical address associated with the local area connection.
3.
On DEN-DC1, open the DHCP
console.
4.
Expand
Superscope
Superscope1
.
5.
Click
Scope [10.10.0.0] FirstScope
.
6.
Right-click
Scope [10.10.0.0] FirstScope
, and then click
Properties
.
7.
On the
Advanced
tab, click
Both
to assign addresses dynamically to both
BOOTP and DHCP clients. Click
OK
.
8.
Click
Reservations
.
9.
Right-click
Reservations
, and then click
New Reservation
.
10.
Type
DEN-CL1
in the Reservation name field.
11.
Type
10.10.0.35
for the IP address.
12.
Enter the physical address for DEN-CL1 in the MAC address
field.
13.
Click
Both
and then click
Add
. Click
Close
when finished.
15.
On DEN-CL1, in the command window, type
ipconfig /release
.
16.
Type
ipconfig /renew
. Verify that the address obtained is
10.10.0.35
.
Objectives
Instructions
Practice
!
Configure DHCP server and scope options
1.
On DEN-CL1, in the Command Prompt window, type
ipconfig /all
. Press
ENTER.
2.
Make note of the default gateway and DNS server values. (Neither of them
exists.)
3.
On DEN-DC1, open the DHCP console.
4.
Expand
den-dc1.contoso.msft
.
5.
Click the
Server Options
node.
6.
Right-click
Server Options
and then click
Configure Options
.
7.
Click the check box for
006 DNS Servers
. In the Server name field, type
DEN-DC1
and then click
Resolve
. Click
Add
and then click
OK
.
8.
Expand
Superscope SuperScope1
and then expand
Scope [10.10.0.0]
FirstScope
.
9.
Under
Scope [10.10.0.0] FirstScope
,
click
Scope Options
.
10.
Right-click
Scope Options
and then click
Configure
Options
.
11.
Click the check box for
003 Router
. In the Server name field, type
DEN-DC1
and then click
Resolve
. Click
Add
and then click
OK
.
12.
On DEN-CL1, in the Command Prompt window, type
ipconfig /release
and
then press ENTER.
13.
Type
ipconfig /renew
and then press ENTER.
14.
Type
ipconfig /all
and then press ENTER to verify that the DNS settings
and the default gateway IP address are set to
10.10.0.2
.