ВУЗ: Не указан
Категория: Не указан
Дисциплина: Не указана
Добавлен: 28.09.2024
Просмотров: 707
Скачиваний: 0
4 - Sequencer
Cut/Copy
Editing: Cut, Copy & Paste
|
|
|
|
|
Cut/Copy/Erase |
||
|
A section of a track (or an entire track) can be cut out, or copied and held |
||
|
on the digital clipboard, and then Pasted to another section in any track. |
||
|
There are several types of Cut and Copy functions available. |
||
|
Cut. Cuts the selected section to the clipboard and moves the following |
||
For more information |
data backward to fill the space in the cut section. |
||
Copy. Copies the selected section to the clipboard and leaves the original |
|||
about Copy and Paste, see |
section unaffected. |
||
Chapter 6: Sample Edit. |
|
|
|
|
Erase All. Erases the selected section and leaves a blank space in the |
||
|
selected section. |
||
|
Erase Notes. Erases only the note data in the selected section. |
||
|
Erase All Controls. Erases only the controller data in the selected section. |
||
|
Erase One Control. Erases only the controller data on the selected |
||
|
controller channel in the selected section. |
||
|
Delete. Erases the selected section and moves the following data backward |
||
|
to fill the space in the deleted section. |
||
|
Truncate. Yes - Any Note-Offsoccuring after the selected End Time will be |
||
|
truncated to the selected End Time. The note length may not be preserved. |
||
|
No - The Note-Off will occur as it was recorded, even if this time falls |
||
|
outside the selected End Time. The note length will be preserved. |
||
EOS 4.0 Software Manual 147
4 - Sequencer
Cut/Copy/Erase
v To Cut/Copy/Erase:
1.From the Sequence Manage screen, press the Edit function key (F3).
2.Press the Utils function key (F1). A second row of function keys appears.
3.Press the Cut/Copy function key (F1). The Cut/Copy menu shown above appears.
4.Select the Start and End time in bars/beats/ticks using the cursor keys to select the field and the Data Entry Control or INC/DEC keys to change the selection.
•Press the All Time function key to select everything in the selected track(s).
•Press the function key to select the current location as the Start and End Times.
5.Select the range of tracks to be cut or copied.
•Press the All Trks function key to select all tracks.
6.Turn Truncate (note-off) On or Off.
7.If you have selected Erase One Control, select the controller number.
8.Press OK to proceed or Cancel to cancel the operation.
9.To go directly to the Paste operation, press Paste.
Note Erase
EOS contains a quick and handy way to erase notes from a recorded track. Only one note can be erased at a time. If more than one note is held, the last note pressed will be used for the erase.
Conditions: For Note Erase to work…
•You must be in Record-Overdub mode.
•Loop Region must be On.
•The sequence must be on the second or subsequent loop.
The E will appear in the display ONLY if the above conditions are met.
v To Use Note Erase Mode:
1.While playing back the sequence in Record-Overdub and Loop mode, press and hold the Set/Shift key. An “E” appears in the Edit screen.
2.Play the note you wish to erase on the keyboard.
3.Release the note to stop erasing.
4.Release the Set key to go out of Erase mode.
148 E-MU Systems
4 - Sequencer
Cut/Copy/Erase
Cut
Start Time End Time
Cut
Section
|
|
Cut Section is |
|
|
|
Result of Cut |
Placed on Clipboard |
|
Erase
Start |
End |
Time |
Time |
Blank
Section
Section is
DUMPED!
Trash
Delete
Start |
End |
Time |
Time |
Blank
Section
Section is
DUMPED!
Trash
EOS 4.0 Software Manual 149
4 - Sequencer
Paste
Paste
Once a section of a track (or entire track) has been cut or copied to the clipboard, it can be Pasted to a destination. The copied section can be placed on any track and can be placed anywhere on the track using the Start Time parameter.
If multiple tracks have been cut or copied to the clipboard, they will be pasted to consecutive tracks between the start and end track numbers specified in the Paste window.
|
|
|
|
|
There are three replacement modes which determine how the clipboard |
||
|
data will be pasted onto the track. |
||
|
Insert. This mode will open up a region in the destination segment at the |
||
|
selected Start Point and will move the data after the Start Point ahead to |
||
|
make room for the clipboard data to be inserted. |
||
_ The clipboard may |
Replace. In this mode, the clipboard data will be pasted to the destination |
||
contain data on a different MIDI |
track at the selected Start Point and will overwrite any data in that section |
||
channel. |
of the track. |
||
|
Merge. In this mode, the clipboard data will be combined with data in the |
||
|
destination track. |
||
_ Using the Repeat feature |
Repeat. Designed to be used in conjunction with Insert mode, this feature |
||
in Merge mode may clog your |
will Paste the clipboard contents from 1 to 127 times, lengthening the |
||
sequence. |
sequence. |
||
To Paste a Section:
1.From the main Sequencer screen, press the Edit function key (F5).
2.Press the Utils function key (F1). A second row of function keys appears.
3.Press the Paste function key (F2). The Paste menu appears.
4.Select the Start Time in bars/beats/ticks.
•Press the CurTime function key to select the current location as the Start Time.
5. Select the Type of Paste. Your choices are: Insert, Replace, or Merge.
150 E-MU Systems