ВУЗ: Не указан
Категория: Не указан
Дисциплина: Не указана
Добавлен: 28.09.2024
Просмотров: 691
Скачиваний: 0
2 - Master Menu
Master Effects
O For more detailed |
Use Master Effects Settings in MultiMode |
In Multi Mode the two effects processors can be either controlled from the |
|
information about Effects see |
Master Effects settings or they can follow the effects settings of the preset |
Chapter 3, Effects. |
on a special MIDI channel. Because up to 16 presets can play at once in |
|
multi mode, the effects cannot be programmed at the preset level. There are |
|
only two effects processors! |
v To Program the Effects Globally for all Presets:
1.Press the Master button. The LED illuminates and the Memory Statistics screen appears.
2.Press the FX function key (F4). A second row of options appears.
3.Press the Setup function key (F3). The Effects Setup menu appears.
4.Move the cursor to the Effects Control field using the cursor buttons.
5.Set the Multi mode Effect Control Channel to master settings using the Data Entry Control or INC/DEC buttons.
6.Press the Exit button three times to save the settings and return to the main screen.
Master Effects A
This function selects the type of effect used. The following effects are currently available:
A EFFECT TYPES
Room 1-3 |
Hall 1 & 2 |
Plate |
Delay |
Panning Delay |
Multitap 1 |
Multitap Pan |
3 Tap |
3 Tap Pan |
Soft Room |
Warm Room |
Perfect Room |
Tiled Room |
Hard Plate |
Warm Hall |
Spacious Hall |
Bright Hall |
Bright Hall Pan |
Bright Plate |
BBall Court |
Gymnasium |
Cavern |
Concert 9 |
Concert 10 Pan |
Reverse Gate |
Gate 2 |
Gate Pan |
Concert 11 |
Medium Concert |
Large Concert |
Large Concert Pan |
Canyon |
DelayVerb 1-3 |
DelayVerb 4-5 Pan |
DelayVerb 6-9 |
|
|
|
|
EOS 4.0 Software Manual 97
2 - Master Menu
Effects Setup
A warning message appears if an effect routing other than “Master” is currently selected.
O Please refer to Chapter 3, Effects for detailed information concerning the Effects.
Master Effects B
This function selects the type of effect used. The following effects are currently available:
B EFFECT TYPES
Chorus 1-5 |
Doubling |
Slapback |
Flange 1-7 |
Big Chorus |
Symphonic |
Ensemble |
Delay |
Delay Stereo 1 & 2 |
Panning Delay |
Delay Chorus |
Pan Delay Chorus 1 & 2 |
Dual Tap 1/3 |
Dual Tap 1/4 |
Vibrato |
Distortion 1 & 2 |
Distortion Flange |
Distorted Chorus |
Distorted Double |
|
|
|
|
|
Effects Setup
The Effects Setup page contains two effects control functions. The first allows the entire effects subsystem to be bypassed if you don't want internal effects.
The Multimode Effects Control lets the effects be controlled by the Master module settings or by a specific preset when in Multimode.
v To Enable or Disable the Effects:
1.Press the Master button. The LED illuminates and the Memory Statistics screen appears.
2.Press the FX function key (F4). A second row of function keys appears.
3.Press the Setup function key (F3). The Effects Setup menu appears.
4.Enable or Bypass the internal effects using the INC/DEC buttons or Data Entry Control.
5.Press the Exit button twice to return to the Memory Statistics screen.
98 E-MU Systems
2 - Master Menu
Effects Setup
O You can create special presets without samples to be used as “Effects Presets.” By assigning these effects presets to the Multi mode Effects Control Channel, you can use Program Change commands to switch between effects during a sequence.
Effects Control
The effects processor controls are very flexible. They can be controlled in three different ways to suit your personal preference and to adapt to different situations.
1.Programmed as part of the preset when playing single presets (Omni or Poly Modes).
2.Programmed from the Master Effects Section when playing either single presets (preset Effect Type set to “Master”) or when in Multi mode.
3.Programmed from the designated control preset when in Multimode. The Effects Control parameter sets the MIDI channel whose preset will control the effects processors.
1 |
Master |
FX |
(Omni or Poly Mode)
2 |
Master |
FX |
(Omni, Poly or Multi modes)
Preset
FX |
Preset
Ch 1 |
FX |
Preset
Ch 16 FX
Effects are part of the Preset
Master Effects
3 |
Master |
|
FX |
||
|
(Multi mode)
Selected FX Control Channel
Preset
Ch 1 FX
Preset
Ch 16 |
FX |
One Channel's Preset determines the Effect Settings
Effects selection can be made in three different ways.
EOS 4.0 Software Manual 99
2 - Master Menu
Effects Setup
In Multimode the two effects processors can be either controlled from the Master Effects settings or they can follow the effects settings of the preset on a specific MIDI channel. This feature allows you to change effects during a sequence.
v To Set the Multimode Effects Control Channel:
1.Press the Master button. The LED illuminates and the Memory Statistics screen appears.
2.Press the FX function key (F4). A second row of function keys appears.
3.Press the Setup function key (F3). The Effects Setup menu appears.
4.Move the cursor to the Multimode Effects Control field using the down cursor button.
5.Select the desired MIDI channel or “Master Settings” using the Data Entry Control, or INC/DEC buttons.
6. Press the Exit button twice to return to the Memory Statistics screen.
100 E-MU Systems
2 - Master Menu
Sequence Manage
Sequence Manage
EOS version 4 contains a powerful 48-track onboard sequencer, always available to capture your musical ideas. The sequencer's easy to use interface lets you lay down tracks almost as fast as you can play them.
Please refer to Chapter 4, Sequencer for detailed information on the sequencer.
The Sequence Manage menu displays the memory used and the number of tracks in the current sequence and contains the following functions:
Utilities. Contains Erase and Copy commands.
Name. Allows you to name your sequences.
Export. Exports the currently selected sequence as a Standard MIDI File.
Loop. Sets the sequence to play continuously or to stop playing once it reaches the end.
Edit. The Edit function key toggles between the main sequencer functions and the sequence editor functions.
Menu/Transport. Toggles between the Sequence Manager functions and the Transport Control keys.
EOS 4.0 Software Manual 101