Файл: Курсовая работа по дисциплине Методы и средства проектирования информационных систем и технологий на тему Разработка регламента выполнения процесса Движение библиотечного фонда.docx

s5 = getappdata(0,'Link5_data');

s6 = getappdata(0,'Link6_data');

s7 = getappdata(0,'Link7_data');

%A1 = getappdata(0,'Area_data');

Link1 = s1.V1;

Link2 = (T_01*s2.V2')';

Link3 = (T_02*s3.V3')';

Link4 = (T_03*s4.V4')';

Link5 = (T_04*s5.V5')';

Link6 = (T_05*s6.V6')';

Link7 = (T_06*s7.V7')';

% Tool = T_07;

% if sqrt(Tool(1,4)^2+Tool(2,4)^2)<514

% Err2 = 1;

% break

% end

%

handles = getappdata(0,'patch_h'); %

L1 = handles(1);

L2 = handles(2);

L3 = handles(3);

L4 = handles(4);

L5 = handles(5);

L6 = handles(6);

L7 = handles(7);

Tr = handles(9);

%

set(L1,'vertices',Link1(:,1:3),'facec', [0.717,0.116,0.123]);

set(L1, 'EdgeColor','none');

set(L2,'vertices',Link2(:,1:3),'facec', [0.216,1,.583]);

set(L2, 'EdgeColor','none');

set(L3,'vertices',Link3(:,1:3),'facec', [0.306,0.733,1]);

set(L3, 'EdgeColor','none');

set(L4,'vertices',Link4(:,1:3),'facec', [1,0.542,0.493]);

set(L4, 'EdgeColor','none');

set(L5,'vertices',Link5(:,1:3),'facec', [0.216,1,.583]);

set(L5, 'EdgeColor','none');

set(L6,'vertices',Link6(:,1:3),'facec', [1,1,0.255]);

set(L6, 'EdgeColor','none');

set(L7,'vertices',Link7(:,1:3),'facec', [0.306,0.733,1]);

set(L7, 'EdgeColor','none');

% store trail in appdata

if trail == 'y'

x_trail = getappdata(0,'xtrail');

y_trail = getappdata(0,'ytrail');

z_trail = getappdata(0,'ztrail');

%

xdata = [x_trail T_04(1,4)];

ydata = [y_trail T_04(2,4)];

zdata = [z_trail T_04(3,4)];

%

setappdata(0,'xtrail',xdata); % used for trail tracking.

setappdata(0,'ytrail',ydata); % used for trail tracking.

setappdata(0,'ztrail',zdata); % used for trail tracking.

%

set(Tr,'xdata',xdata,'ydata',ydata,'zdata',zdata);

end

drawnow

end

setappdata(0,'ThetaOld',[theta1,theta2,theta3,theta4,theta5,theta6]);

end

%%

%

%

%%

function InitHome

% Use forward kinematics to place the robot in a specified

% configuration.

% Figure setup data, create a new figure for the GUI

set(0,'Units','pixels')

dim = get(0,'ScreenSize');

fig_1 = figure('doublebuffer','on','Position',[0,35,dim(3)-200,dim(4)-110],...

'MenuBar','none','Name',' 3D Puma Robot Graphical Demo',...

'NumberTitle','off','CloseRequestFcn',@del_app);

hold on;

%light('Position',[-1 0 0]);

light % add a default light

daspect([1 1 1]) % Setting the aspect ratio

view(135,25)

xlabel('X'),ylabel('Y'),zlabel('Z');

title('WWU Robotics Lab PUMA 762');

axis([-1500 1500 -1500 1500 -1120 1500]);

plot3([-1500,1500],[-1500,-1500],[-1120,-1120],'k')

plot3([-1500,-1500],[-1500,1500],[-1120,-1120],'k')

plot3([-1500,-1500],[-1500,-1500],[-1120,1500],'k')

plot3([-1500,-1500],[1500,1500],[-1120,1500],'k')

plot3([-1500,1500],[-1500,-1500],[1500,1500],'k')

plot3([-1500,-1500],[-1500,1500],[1500,1500],'k')

s1 = getappdata(0,'Link1_data');

s2 = getappdata(0,'Link2_data');

s3 = getappdata(0,'Link3_data');

s4 = getappdata(0,'Link4_data');

s5 = getappdata(0,'Link5_data');

s6 = getappdata(0,'Link6_data');

s7 = getappdata(0,'Link7_data');

A1 = getappdata(0,'Area_data');

%

a2 = 650;

a3 = 0;

d3 = 190;

d4 = 600;

Px = 5000;

Py = 5000;

Pz = 5000;

%The 'home' position, for init.

t1 = 90;

t2 = -90;

t3 = -90;

t4 = 0;

t5 = 0;

t6 = 0;
% Forward Kinematics

T_01 = tmat(0, 0, 0, t1);

T_12 = tmat(-90, 0, 0, t2);

T_23 = tmat(0, a2, d3, t3);

T_34 = tmat(-90, a3, d4, t4);

T_45 = tmat(90, 0, 0, t5);

T_56 = tmat(-90, 0, 0, t6);

% Each link fram to base frame transformation

T_02 = T_01*T_12;

T_03 = T_02*T_23;

T_04 = T_03*T_34;

T_05 = T_04*T_45;

T_06 = T_05*T_56;
% Actual vertex data of robot links

Link1 = s1.V1;

Link2 = (T_01*s2.V2')';

Link3 = (T_02*s3.V3')';

Link4 = (T_03*s4.V4')';

Link5 = (T_04*s5.V5')';

Link6 = (T_05*s6.V6')';

Link7 = (T_06*s7.V7')';
% points are no fun to watch, make it look 3d.

L1 = patch('faces', s1.F1, 'vertices' ,Link1(:,1:3));

L2 = patch('faces', s2.F2, 'vertices' ,Link2(:,1:3));

L3 = patch('faces', s3.F3, 'vertices' ,Link3(:,1:3));

L4 = patch('faces', s4.F4, 'vertices' ,Link4(:,1:3));

L5 = patch('faces', s5.F5, 'vertices' ,Link5(:,1:3));

L6 = patch('faces', s6.F6, 'vertices' ,Link6(:,1:3));

L7 = patch('faces', s7.F7, 'vertices' ,Link7(:,1:3));

A1 = patch('faces', A1.Fa, 'vertices' ,A1.Va(:,1:3));

Tr = plot3(0,0,0,'b.'); % holder for trail paths

%

setappdata(0,'patch_h',[L1,L2,L3,L4,L5,L6,L7,A1,Tr])

%

setappdata(0,'xtrail',0); % used for trail tracking.

setappdata(0,'ytrail',0); % used for trail tracking.

setappdata(0,'ztrail',0); % used for trail tracking.

%

set(L1, 'facec', [0.717,0.116,0.123]);

set(L1, 'EdgeColor','none');

set(L2, 'facec', [0.216,1,.583]);

set(L2, 'EdgeColor','none');

set(L3, 'facec', [0.306,0.733,1]);

set(L3, 'EdgeColor','none');

set(L4, 'facec', [1,0.542,0.493]);

set(L4, 'EdgeColor','none');

set(L5, 'facec', [0.216,1,.583]);

set(L5, 'EdgeColor','none');

set(L6, 'facec', [1,1,0.255]);

set(L6, 'EdgeColor','none');

set(L7, 'facec', [0.306,0.733,1]);

set(L7, 'EdgeColor','none');

set(A1, 'facec', [.8,.8,.8],'FaceAlpha',.25);

set(A1, 'EdgeColor','none');

%

setappdata(0,'ThetaOld',[90,-90,-90,0,0,0]);

%

end

%%

function T = tmat(alpha, a, d, theta)

% tmat(alpha, a, d, theta) (T-Matrix used in Robotics)

% The homogeneous transformation called the "T-MATRIX"

% as used in the Kinematic Equations for robotic type

% systems (or equivalent).

%

% This is equation 3.6 in Craig's "Introduction to Robotics."

% alpha, a, d, theta are the Denavit-Hartenberg parameters.

%

% (NOTE: ALL ANGLES MUST BE IN DEGREES.)

%

alpha = alpha*pi/180; %Note: alpha is in radians.

theta = theta*pi/180; %Note: theta is in radians.

c = cos(theta);

s = sin(theta);

ca = cos(alpha);

sa = sin(alpha);

T = [c -s 0 a; s*ca c*ca -sa -sa*d; s*sa c*sa ca ca*d; 0 0 0 1];

end

%%

function del_app(varargin)

%This is the main figure window close function, to remove any

% app data that may be left due to using it for geometry.

%CloseRequestFcn

% here is the data to remove:

% Link1_data: [1x1 struct]

% Link2_data: [1x1 struct]

% Link3_data: [1x1 struct]

% Link4_data: [1x1 struct]

% Link5_data: [1x1 struct]

% Link6_data: [1x1 struct]

% Link7_data: [1x1 struct]

% Area_data: [1x1 struct]

% patch_h: [1x9 double]

% ThetaOld: [90 -182 -90 -106 80 106]

% xtrail: 0

% ytrail: 0

% ztrail: 0

% Now remove them.

rmappdata(0,'Link1_data');

rmappdata(0,'Link2_data');

rmappdata(0,'Link3_data');

rmappdata(0,'Link4_data');

rmappdata(0,'Link5_data');

rmappdata(0,'Link6_data');

rmappdata(0,'Link7_data');

rmappdata(0,'ThetaOld');

rmappdata(0,'Area_data');

rmappdata(0,'patch_h');

rmappdata(0,'xtrail');

rmappdata(0,'ytrail');

rmappdata(0,'ztrail');

delete(fig_1);

end
%%

function [hout,ax_out] = uibutton(varargin)

%uibutton: Create pushbutton with more flexible labeling than uicontrol.

% Usage:

% uibutton accepts all the same arguments as uicontrol except for the

% following property changes:

%

% Property Values

% ----------- ------------------------------------------------------

% Style 'pushbutton', 'togglebutton' or 'text', default =

% 'pushbutton'.

% String Same as for text() including cell array of strings and

% TeX or LaTeX interpretation.

% Interpreter 'tex', 'latex' or 'none', default = default for text()

%

% Syntax:

% handle = uibutton('PropertyName',PropertyValue,...)

% handle = uibutton(parent,'PropertyName',PropertyValue,...)

% [text_obj,axes_handle] = uibutton('Style','text',...

% 'PropertyName',PropertyValue,...)

%

% uibutton creates a temporary axes and text object containing the text to

% be displayed, captures the axes as an image, deletes the axes and then

% displays the image on the uicontrol. The handle to the uicontrol is

% returned. If you pass in a handle to an existing uicontol as the first

% argument then uibutton will use that uicontrol and not create a new one.

%

% If the Style is set to 'text' then the axes object is not deleted and the

% text object handle is returned (as well as the handle to the axes in a

% second output argument).

%

% See also UICONTROL.

% Version: 1.6, 20 April 2006

% Author: Douglas M. Schwarz

% Email: dmschwarz=ieee*org, dmschwarz=urgrad*rochester*edu

% Real_email = regexprep(Email,{'=','*'},{'@','.'})
% Detect if first argument is a uicontrol handle.

keep_handle = false;

if nargin > 0

h = varargin{1};

if isscalar(h) && ishandle(h) && strcmp(get(h,'Type'),'uicontrol')

keep_handle = true;

varargin(1) = [];

end

end

% Parse arguments looking for 'Interpreter' property. If found, note its

% value and then remove it from where it was found.

interp_value = get(0,'DefaultTextInterpreter');

arg = 1;

remove = [];

while arg <= length(varargin)

v = varargin{arg};

if isstruct(v)

fn = fieldnames(v);

for i = 1:length(fn)

if strncmpi(fn{i},'interpreter',length(fn{i}))

interp_value = v.(fn{i});

v = rmfield(v,fn{i});

end

end

varargin{arg} = v;

arg = arg + 1;

elseif ischar(v)

if strncmpi(v,'interpreter',length(v))

interp_value = varargin{arg+1};

remove = [remove,arg,arg+1];

end

arg = arg + 2;

elseif arg == 1 && isscalar(v) && ishandle(v) && ...

any(strcmp(get(h,'Type'),{'figure','uipanel'}))

arg = arg + 1;

else

error('Invalid property or uicontrol parent.')

end

end

varargin(remove) = [];

% Create uicontrol, get its properties then hide it.

if keep_handle

set(h,varargin{:})

else

h = uicontrol(varargin{:});

end

s = get(h);

if

any(strcmp(s.Style,{'pushbutton','togglebutton','text'}))

---

delete(h)

error('''Style'' must be pushbutton, togglebutton or text.')

end

set(h,'Visible','off')

% Create axes.

parent = get(h,'Parent');

ax = axes('Parent',parent,...

'Units',s.Units,...

'Position',s.Position,...

'XTick',[],'YTick',[],...

'XColor',s.BackgroundColor,...

'YColor',s.BackgroundColor,...

'Box','on',...

'Color',s.BackgroundColor);

% Adjust size of axes for best appearance.

set(ax,'Units','pixels')

pos = round(get(ax,'Position'));

if strcmp(s.Style,'text')

set(ax,'Position',pos + [0 1 -1 -1])

else

set(ax,'Position',pos + [4 4 -8 -8])

end

switch s.HorizontalAlignment

case 'left'

x = 0.0;

case 'center'

x = 0.5;

case 'right'

x = 1;

end

% Create text object.

text_obj = text('Parent',ax,...

'Position',[x,0.5],...

'String',s.String,...

'Interpreter',interp_value,...

'HorizontalAlignment',s.HorizontalAlignment,...

'VerticalAlignment','middle',...

'FontName',s.FontName,...

'FontSize',s.FontSize,...

'FontAngle',s.FontAngle,...

'FontWeight',s.FontWeight,...

'Color',s.ForegroundColor);

% If we are creating something that looks like a text uicontrol then we're

% all done and we return the text object and axes handles rather than a

% uicontrol handle.

if strcmp(s.Style,'text')

delete(h)

if nargout

hout = text_obj;

ax_out = ax;

end

return

end

% Capture image of axes and then delete the axes.

frame = getframe(ax);

delete(ax)

% Build RGB image, set background pixels to NaN and put it in 'CData' for

% the uicontrol.

if isempty(frame.colormap)

rgb = frame.cdata;

else

rgb = reshape(frame.colormap(frame.cdata,:),[pos([4,3]),3]);

end

size_rgb = size(rgb);

rgb = double(rgb)/255;

back = repmat(permute(s.BackgroundColor,[1 3 2]),size_rgb(1:2));

isback = all(rgb == back,3);

rgb(repmat(isback,[1 1 3])) = NaN;

set(h,'CData',rgb,'String','','Visible',s.Visible)

% Assign output argument if necessary.

if nargout

hout = h;

end

%%

end

end

% Finally.

demo = uicontrol(fig_1,'String','Demo','callback',@demo_button_press,...

'Position',[20 5 60 20]);

rnd_demo = uicontrol(fig_1,'String','Random Move','callback',@rnd_demo_button_press,...

'Position',[100 5 80 20]);

clr_trail = uicontrol(fig_1,'String','Clr Trail','callback',@clr_trail_button_press,...

'Position',[200 5 60 20]);

%

home = uicontrol(fig_1,'String','Home','callback',@home_button_press,...

'Position',[280 5 70 20]);

%

% Kinematics Panel

%

K_p = uipanel(fig_1,...

'units','pixels',...

'Position',[20 45 265 200],...

'Title','Kinematics','FontSize',11);

%

% Angle Range Default Name

% Theta 1: 320 (-160 to 160) 90 Waist Joint

% Theta 2: 220 (-110 to 110) -90 Shoulder Joint

% Theta 3: 270 (-135 to 135) -90 Elbow Joint

% Theta 4: 532 (-266 to 266) 0 Wrist Roll

% Theta 5: 200 (-100 to 100) 0 Wrist Bend

% Theta 6: 532 (-266 to 266) 0 Wrist Swivel

t1_home = 90; % offset to define the "home" position as UP.

t2_home = -90;

t3_home = -90;

LD = 105; % Left, used to set the GUI.

HT = 18; % Height

BT = 156; % Bottom

%% GUI buttons for Theta 1. pos is: [left bottom width height]

t1_slider = uicontrol(K_p,'style','slider',...

'Max',160,'Min',-160,'Value',0,...

'SliderStep',[0.05 0.2],...

'callback',@t1_slider_button_press,...

'Position',[LD BT 120 HT]);

t1_min = uicontrol(K_p,'style','text',...

'String','-160',...

'Position',[LD-30 BT+1 25 HT-4]); % L, from bottom, W, H

t1_max = uicontrol(K_p,'style','text',...

'String','+160',...

'Position',[LD+125 BT+1 25 HT-4]); % L, B, W, H

t1_text = uibutton(K_p,'style','text',... % Nice program Doug. Need this

'String','\theta_1',... % due to no TeX in uicontrols.

'Position',[LD-100 BT 20 HT]); % L, B, W, H

% t1_text = uicontrol(K_p,'style','text',... % when matlab fixes uicontrol

% 'String','t1',... % for TeX, then I can use this.

---

% 'Position',[LD-100 BT 20 HT]); % L, B, W, H

t1_edit = uicontrol(K_p,'style','edit',...

'String',0,...

'callback',@t1_edit_button_press,...

'Position',[LD-75 BT 30 HT]); % L, B, W, H

%

%% GUI buttons for Theta 2.

BT = 126; % Bottom

t2_slider = uicontrol(K_p,'style','slider',...

'Max',115,'Min',-115,'Value',0,... % Mech. stop limits !

'SliderStep',[0.05 0.2],...

'callback',@t2_slider_button_press,...

'Position',[LD BT 120 HT]);

t2_min = uicontrol(K_p,'style','text',...

'String','-110',...

'Position',[LD-30 BT+1 25 HT-4]); % L, from bottom, W, H

t2_max = uicontrol(K_p,'style','text',...

'String','+110',...

'Position',[LD+125 BT+1 25 HT-4]); % L, B, W, H

t2_text = uibutton(K_p,'style','text',...

'String','\theta_2',...

---

'Position',[LD-100 BT 20 HT]); % L, B, W, H

t2_edit = uicontrol(K_p,'style','edit',...

'String',0,...

'callback',@t2_edit_button_press,...

'Position',[LD-75 BT 30 HT]); % L, B, W, H

%

%% GUI buttons for Theta 3.

BT = 96; % Bottom

t3_slider = uicontrol(K_p,'style','slider',...

'Max',135,'Min',-135,'Value',0,...

'SliderStep',[0.05 0.2],...

'callback',@t3_slider_button_press,...

'Position',[LD BT 120 HT]);

t3_min = uicontrol(K_p,'style','text',...

'String','-135',...

'Position',[LD-30 BT+1 25 HT-4]); % L, from bottom, W, H

t3_max = uicontrol(K_p,'style','text',...

'String','+135',...

'Position',[LD+125 BT+1 25 HT-4]); % L, B, W, H

t3_text = uibutton(K_p,'style','text',...

'String','\theta_3',...

'Position',[LD-100 BT 20 HT]); % L, B, W, H

t3_edit = uicontrol(K_p,'style','edit',...

'String',0,...

'callback',@t3_edit_button_press,...

'Position',[LD-75 BT 30 HT]); % L, B, W, H

%

%% GUI buttons for Theta 4.

BT = 66; % Bottom

t4_slider = uicontrol(K_p,'style','slider',...

'Max',266,'Min',-266,'Value',0,...

'SliderStep',[0.05 0.2],...

'callback',@t4_slider_button_press,...

'Position',[LD BT 120 HT]);

t4_min = uicontrol(K_p,'style','text',...

'String','-266',...

'Position',[LD-30 BT+1 25 HT-4]); % L, from bottom, W, H

t4_max = uicontrol(K_p,'style','text',...

'String','+266',...

'Position',[LD+125 BT+1 25 HT-4]); % L, B, W, H

t4_text = uibutton(K_p,'style','text',...

'String','\theta_4',...

'Position',[LD-100 BT 20 HT]); % L, B, W, H

t4_edit = uicontrol(K_p,'style','edit',...

'String',0,...

'callback',@t4_edit_button_press,...

'Position',[LD-75 BT 30 HT]); % L, B, W, H

%

%% GUI buttons for Theta 5.

BT = 36; % Bottom

t5_slider = uicontrol(K_p,'style','slider',...

'Max',100,'Min',-100,'Value',0,...

'SliderStep',[0.05 0.2],...

'callback',@t5_slider_button_press,...

'Position',[LD BT 120 HT]);

t5_min = uicontrol(K_p,'style','text',...

'String','-100',...

'Position',[LD-30 BT+1 25 HT-4]); % L, from bottom, W, H

t5_max = uicontrol(K_p,'style','text',...

'String','+100',...

'Position',[LD+125 BT+1 25 HT-4]); % L, B, W, H

t5_text = uibutton(K_p,'style','text',...

'String','\theta_5',...

'Position',[LD-100 BT 20 HT]); % L, B, W, H

t5_edit = uicontrol(K_p,'style','edit',...

'String',0,...

'callback',@t5_edit_button_press,...

'Position',[LD-75 BT 30 HT]); % L, B, W, H

%

%% GUI buttons for Theta 6.

BT = 6; % Bottom

t6_slider = uicontrol(K_p,'style','slider',...

'Max',266,'Min',-266,'Value',0,...

'SliderStep',[0.05 0.2],...

'callback',@t6_slider_button_press,...

'Position',[LD BT 120 HT]);

t6_min = uicontrol(K_p,'style','text',...

'String','-266',...

'Position',[LD-30 BT+1 25 HT-4]); % L, from bottom, W, H

t6_max = uicontrol(K_p,'style','text',...

'String','+266',...

'Position',[LD+125 BT+1 25 HT-4]); % L, B, W, H

t6_text = uibutton(K_p,'style','text',...

'String','\theta_6',...

'Position',[LD-100 BT 20 HT]); % L, B, W, H

t6_edit = uicontrol(K_p,'style','edit',...

'String',0,...

'callback',@t6_edit_button_press,...

'Position',[LD-75 BT 30 HT]); % L, B, W, H

%

%% Slider for Theta 1 motion.

%

function t1_slider_button_press(h,dummy)

slider_value = round(get(h,'Value'));

set(t1_edit,'string',slider_value);

T_Old = getappdata(0,'ThetaOld');

t2old = T_Old(2); t3old = T_Old(3); t4old = T_Old(4);

t5old = T_Old(5); t6old = T_Old(6);

pumaANI(slider_value+t1_home,t2old,t3old,t4old,t5old,t6old,10,'n')

end

%

%% Slider for Theta 2 motion.

%

function t2_slider_button_press(h,dummy)

slider_value = round(get(h,'Value'));

set(t2_edit,'string',slider_value);

T_Old = getappdata(0,'ThetaOld');

t1old = T_Old(1); t3old = T_Old(3); t4old = T_Old(4);

t5old = T_Old(5); t6old = T_Old(6);

pumaANI(t1old,slider_value+t2_home,t3old,t4old,t5old,t6old,10,'n')

end

---

%

%% Slider for Theta 3 motion.

function t3_slider_button_press(h,dummy)

slider_value = round(get(h,'Value'));

set(t3_edit,'string',slider_value);

T_Old = getappdata(0,'ThetaOld');

t1old = T_Old(1); t2old = T_Old(2); t4old = T_Old(4);

t5old = T_Old(5); t6old = T_Old(6);

pumaANI(t1old,t2old,slider_value+t3_home,t4old,t5old,t6old,10,'n')

end

%

%% Slider for Theta 4 motion.

function t4_slider_button_press(h,dummy)

slider_value = round(get(h,'Value'));

set(t4_edit,'string',slider_value);

T_Old = getappdata(0,'ThetaOld');

t1old = T_Old(1); t2old = T_Old(2); t3old = T_Old(3);

t5old = T_Old(5); t6old = T_Old(6);

pumaANI(t1old,t2old,t3old,slider_value,t5old,t6old,10,'n')

end

%

%% Slider for Theta 5 motion.

function t5_slider_button_press(h,dummy)

slider_value = round(get(h,'Value'));

set(t5_edit,'string',slider_value);

T_Old = getappdata(0,'ThetaOld');

t1old = T_Old(1); t2old = T_Old(2); t3old = T_Old(3);

t4old = T_Old(4); t6old = T_Old(6);

pumaANI(t1old,t2old,t3old,t4old,slider_value,t6old,10,'n')

end

%

%% Slider for Theta 6 motion.

function t6_slider_button_press(h,dummy)

slider_value = round(get(h,'Value'));

set(t6_edit,'string',slider_value);

T_Old = getappdata(0,'ThetaOld');

t1old = T_Old(1); t2old = T_Old(2); t3old = T_Old(3);

t4old = T_Old(4); t5old = T_Old(5);

pumaANI(t1old,t2old,t3old,t4old,t5old,slider_value,10,'n')

end

%

%% Edit box for Theta 1 motion.

%

function t1_edit_button_press(h,dummy)

user_entry = check_edit(h,-160,160,0,t1_edit);

set(t1_slider,'Value',user_entry); % slider = text box.

T_Old = getappdata(0,'ThetaOld'); % Current pose

%

t2old = T_Old(2); t3old = T_Old(3); t4old = T_Old(4);

t5old = T_Old(5); t6old = T_Old(6);

%

pumaANI(user_entry+t1_home,t2old,t3old,t4old,t5old,t6old,10,'n')

end

%

%% Edit box for Theta 2 motion.

%

function t2_edit_button_press(h,dummy)

user_entry = check_edit(h,-110,110,0,t2_edit);

set(t2_slider,'Value',user_entry); % slider = text box.

T_Old = getappdata(0,'ThetaOld'); % Current pose

%

t1old = T_Old(1); t3old = T_Old(3); t4old = T_Old(4);

t5old = T_Old(5); t6old = T_Old(6);

%

pumaANI(t1old,user_entry+t2_home,t3old,t4old,t5old,t6old,10,'n')

end

%% Edit box for Theta 3 motion.

%

function t3_edit_button_press(h,dummy)

user_entry = check_edit(h,-135,135,0,t3_edit);

set(t3_slider,'Value',user_entry); % slider = text box.

T_Old = getappdata(0,'ThetaOld'); % Current pose

%

t1old = T_Old(1); t2old = T_Old(2); t4old = T_Old(4);

t5old = T_Old(5); t6old = T_Old(6);

%

pumaANI(t1old,t2old,user_entry+t3_home,t4old,t5old,t6old,10,'n')

end

%%

%% Edit box for Theta 4 motion.

%

function t4_edit_button_press(h,dummy)

user_entry = check_edit(h,-266,266,0,t4_edit);

set(t4_slider,'Value',user_entry); % slider = text box.

T_Old = getappdata(0,'ThetaOld'); % Current pose

%

t1old = T_Old(1); t2old = T_Old(2); t3old = T_Old(3);

t5old = T_Old(5); t6old = T_Old(6);

%

pumaANI(t1old,t2old,t3old,user_entry,t5old,t6old,10,'n')

end

%% Edit box for Theta 5 motion.

%

function t5_edit_button_press(h,dummy)

user_entry = check_edit(h,-100,100,0,t5_edit);

set(t5_slider,'Value',user_entry); % slider = text box.

T_Old = getappdata(0,'ThetaOld'); % Current pose

%

t1old = T_Old(1); t2old = T_Old(2); t3old = T_Old(3);

t4old = T_Old(4); t6old = T_Old(6);

%

pumaANI(t1old,t2old,t3old,t4old,user_entry,t6old,10,'n')

end

%%

%% Edit box for Theta 6 motion.

%

function t6_edit_button_press(h,dummy)

user_entry = check_edit(h,-266,266,0,t6_edit);

set(t6_slider,'Value',user_entry); % slider = text box.

T_Old = getappdata(0,'ThetaOld'); % Current pose

%

t1old = T_Old(1); t2old = T_Old(2); t3old = T_Old(3);

t4old = T_Old(4); t5old = T_Old(5);

%

pumaANI(t1old,t2old,t3old,t4old,t5old,user_entry,10,'n')

end

%%

function user_entry = check_edit(h,min_v,max_v,default,h_edit)

---