Файл: 92FWD_8F.pdf

AA BODY

CAUTION: Do not operate the radio with speaker leads detached. Damage to the transistors may result.

FRONT DOOR MOUNTED SPEAKER REPLACEMENT

(1)Remove door trim panel.

(2)Remove speaker-adaptor retaining screws (Fig.

21).

Fig. 21 Front Door Mounted SpeakerÐAA Body

(3)Pull speaker away from door and disconnect wiring.

(4)For installation reverse the above procedures.

REAR DOOR MOUNTED SPEAKER REPLACEMENT

(1) Remove door trim panel.

(2) Remove speaker-adaptor retaining screws (Fig.

22).

Fig. 22 Rear Door Mounted SpeakerÐAA Body

(3)Pull speaker away from door and disconnect wiring.

(4)For installation reverse above procedures.

AG and AJ BODIES

CAUTION: Do not operate the radio with speaker leads detached. Damage to the transistors may result.

INSTRUMENT PANEL SPEAKERS REPLACEMENT

(1)Remove instrument panel top cover (Fig. 23).

(2)Remove two speaker retaining screws.

(3)Lift speaker away from panel and disconnect wiring.

(4)For installation reverse above procedures.

FRONT DOOR MOUNTED SPEAKER REPLACEMENTÐAG BODY

(1)Remove door trim panel.

(2)Remove two speaker-adaptor retaining screws (Fig. 24).

(3)Pull speaker away from door and disconnect wiring.

(4)For installation reverse above procedures.

Fig. 23 Instrument Panel SpeakersÐAG and AJ

Bodies

Fig. 24 Front Door Mounted SpeakerÐAG Body

REAR SPEAKER REPLACEMENTÐAG BODY

(1)Remove speaker grille by pulling away from quarter trim panel to disengage retaining clips (Fig. 25).

(2)Remove four speaker retaining screws.

(3)Pull speaker away from body and disconnect wiring.

(4)For installation reverse above procedures.

DOOR MOUNTED SPEAKER

REPLACEMENTÐAJ BODY

(1)Pull speaker grille away from door trim panel to disengage retaining clips (Fig. 26).

(2)Remove two speaker retaining screws.

(3)Pull speaker away from door and disconnect wiring.

(4)For installation reverse above procedures.

Fig. 25 Rear SpeakerÐAG Body

Fig. 26 Door Mounted SpeakerÐAJ Body

REAR SPEAKER REPLACEMENTÐAJ BODY WITH 60/40 FOLDING REAR SEAT

(1)Remove 40-side seat back.

(2)Remove 60-side seat back.

(3)Remove outboard pivot brackets.

(4)Remove seat cushion.

(5)Remove quarter trim lower extension panel.

(6)Remove front seat belt turning loop and cover.

(7)Remove rear reading lamp.

(8)Remove quarter trim panel.

(9)Remove two seat back latches.

(10)Pull out shelf trim side extension molding.

(11)Remove shelf trim center extension molding.

(12) Remove shelf trim panel (Fig. 27).

Fig. 27 Rear SpeakerÐAJ Body

(13)Remove four speaker retaining screws.

(14)Lift speaker away from shelf panel and disconnect wiring.

(15)For installation reverse above procedures. Be sure to position speakers so that terminals are pointing outward.

REAR SPEAKER REPLACEMENTÐAJ BODY WITH FIXED SEAT BACK

(1)Remove seat cushion.

(2)Remove seat back.

(3)Remove quarter trim panels.

(4)Remove shelf trim panel.

(5)Remove four speaker retaining screws (Fig. 27).

(6)Lift speaker away from shelf panel and disconnect wiring.

(7)For installation reverse above procedures. Be sure to position speakers so that terminals are pointing outward.

REAR SPEAKER REPLACEMENTÐAJ BODY CONVERTIBLE

(1)Move folding top to UP position.

(2)Unsnap sling well from tacking strip and foldout of the way to gain access to speaker.

(3)Lower folding top to improve speaker accessibil-

ity.

(4)Remove two speaker retaining screws (Fig. 28).

(5)Disconnect wiring and pull out speaker.

(6)For installation reverse above procedures.

AP Body

CAUTION: Do not operate the radio with speaker leads detached. Damage to the transistors may result.

Fig. 28 Rear SpeakerÐAJ Body

DOOR MOUNTED SPEAKER

REPLACEMENTÐAP BODY

(1)Remove door trim panel.

(2)Remove two screws holding speaker to inner door panel (Fig. 29).

Fig. 29 Door Mounted SpeakerÐAP Body

(3)Pull speaker out and disconnect wiring.

(4)For installation reverse above procedures.

REAR MOUNTED SPEAKER

REPLACEMENTÐAP BODY

(1)Remove cargo side trim panel (Fig. 30).

(2)Reaching up underneath quarter panel extension, remove four speaker retaining nuts (Fig. 31).

(3)Move speaker away from mounting bracket and disconnect wiring.

8F - 12 AUDIO SYSTEM

Fig. 30 Cargo Side Trim PanelÐAP Body

Fig. 31 Rear Mounted SpeakerÐAP Body

(4) For installation reverse above procedures.

AC AND AY BODIES

CAUTION: Do not operate the radio with speaker leads detached. Damage to the transistors may result.

INSTRUMENT PANEL SPEAKER REPLACEMENT

(1)Carefully, pry speaker grille away from instrument panel (Fig. 32).

(2)Remove two speaker retaining screws.

(3)Lift speaker away from panel and disconnect wiring.

Ä

Fig. 32 Instrument Panel SpeakersÐAC and AY

Bodies

(4) For installation reverse above procedures.

DOOR MOUNTED SPEAKER REPLACEMENTÐAC AND AY BODIES

(1) Carefully, pry speaker grille away from door trim panel (Fig. 33).

Fig. 33 Door Mounted SpeakerÐAC and AY Bodies

(2)Remove two speaker retaining screws.

(3)Pull speaker away from door and disconnect wiring.

(4)For installation reverse above procedures.

REAR SPEAKER REPLACEMENTÐAC AND AY BODIES

(1)Remove seat cushion.

(2)Remove seat back.

(3)Remove shelf trim panel (Fig. 34).

Fig. 34 Rear SpeakersÐAC and AY Bodies

(4)Remove four speaker retaining screws.

(5)Pull speaker away from shelf panel and disconnect wiring.

(6)For installation reverse above procedures.

INFINITY REMOTE AMPLIFIERÐAC AND AY BODIES

The amplifier is located in the trunk on the rear seat bulkhead and the behind rear trim panel.

When the radio system is ON, and all or some speakers are not operating or have a noise distortion refer to the diagnostic tests. The amplifier has the pin connections list on the case (Fig. 35).

CONDITION: NOISE DISTORTION IN ALL SPEAKERS

²Check battery voltage for 11 Volts or more

²Check amplifier connectors and wires for proper connection

²If OK check radio, refer to Radio Diagnosis

²If OK replace amplifier

CONDITION: ELECTRICAL NOISE DISTORTION ONE SPEAKER

² Remove output signal connector from amplifier and check for short to ground on the speaker with the distortion. Refer to Fig. 35 for the appropriate pin numbers.

Fig. 35 Amplifier Test

²If shorted to ground disconnect speaker connector and recheck from the amplifier for short to ground.

²If still shorted to ground repair wires. Not shorted to ground replace speaker.

²No Short to ground, check speaker resistance at amplifier connector for three to five ohms.

²If resistance is OK refer to Radio Diagnosis. If radio checks OK replace amplifier.

²If resistance is less than three ohms check speaker. Less than three ohms replace speaker. If resistance is OK repair wires

CONDITION: MECHANICAL NOISE DISTORTION

²Check trim for loose parts and speaker attachments for buzzes

²Remove speaker still connected and listen for distortion. Distortion replace speaker.

CONDITION: ONE SPEAKER NON-OPERATIVE

²Remove output signal connector from amplifier and check for three to five ohms resistance to the nonoperative speaker. Refer to Fig. 35 for the appropriate pin numbers.

²If resistance is less than three ohms, test speaker for resistance.

²If OK repair wire. If not replace speaker.